USB Charger Mechanism Double Output 2*2.4A 2*3.1A

• Number of Holes: Double
• Application: Commercial, Industrial, Residential/General-Purpose
• Grounding: Standard Grounding
• Package: SMT Package
• Brand: Ravelo
• IP Rating: Class 2
• Model NO.: RUSB-DCM
• Color: White
• Certification: SAA, CE
• Transport Package: Carton
• Specification: 50 pcs per carton
• Trademark: RAVELO
• Origin: China
• HS Code: 8536690000

Product Description

Meet safety standards:
AS/NZS 62368.1
IEC/EN 62368-1

Description:
· High charging capacity.
· Capable of charging up to two tablets/smart-phones.
· simultaneously at their maximum capacity.
· Suitable for smart-phones, tables, fitness bands and running watches.
· Charging module installed in wall cavity. 
· To be installed in switch plates or powerpionts with an extra mechanism hole. 
· Suitable for all commercial and residential installations such as kitchens and bedside tables.
· Overload protection on output (USB circuit).
· Low standby power consumption: < 0.1W.
· Indoor use only.

Technical specification:

Cat NO.	RUSB-DCM48	RUSB-DCM62
Description	USB Charger Mechanism
Colour	White
Nominal input voltage	220-240V a.c.
Nominal input frequency	50/60Hz
Nominal input current	500mA
Stand-by power consumption	<0.1W
Nominal output voltage	5V d.c.
Nominal output current	2×2.4A	2×3.1A
Energy efficiency	Level VI, ≥85% measured at USB socket output side
Safety standard	AS/NZS 62368.1   IEC/EN 62368-1
Protection class	Class II
Overload protection on output	Yes
Surge protection	5.1A ± 0.2A
Operating temperature	0°C to +40°C
Storage temperature	-20°C to +60°C
Humidity	20% to 85% RH Non-condensing
Hi-pot test	Applying 3000Vac for 1 minute, leakage current must be less than 5mA
Insulation Resistance	Minimum 100M ohms @ DC500V
Short circuit protection	No damage to this power supply when output shorted to ground. When the short-circuited is removed, the adapter shall promptly recover its normal operation.
Drop height	1.0m above 50mm hardwood
Method	Total 6 times. Drop one time for each of the 6 case surfaces.
Expected result	After drop test, the unit should still operate properly. Small nich or slight deformation may be accepted.
Surface	Damage and rusting are not permitted.